Update Official Lineage OS HTC 10

Download and Update Official Lineage OS HTC 10 (Pme) Android Nougat 7.1.1.

LINEAGE OS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any obligation to have any Google application installed. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

LET’s Know About HTC 10 Specification first.

 

HTC 10 smartphone comes with a 5.20-inch touchscreen display with a resolution of 1440 pixels by 2560 pixels at a PPI of 564 pixels per inch.

The HTC 10 comes along with 1.6GHz quad-core Qualcomm Snapdragon 820 processor and with 4GB of RAM. The phone packs 32GB of internal storage that can be upgraded up to 2000GB via a microSD card. HTC 10 packs a 12-Ultrapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The HTC 10 runs on Android 6 and comes with  3000mAh power non-removable battery. It measures 145.90 x 71.90 x 9.00 (height x width x thickness) and weigh 161.00 grams.

The HTC 10 is a single SIM (GSM) smartphone that accepts a Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Compass Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

 

DISCLAIMER:
THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK. Installing a custom ROM on a HTC 10 (Pme) requires the bootloader to be unlock on the HTC 10 (Pme) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and Mobfreak.com will not be responsible for any miss-happening.

Pre-requirements Before Starting:

Take care of mentioned tasks before you continue with flashing custom ROM:

Task 1: Install USB drivers for your device on your PC.

Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos & videos saved on your Device internal or external storage.

Task 3: Do check that your device is a full charge. Ideally, the battery level should be about 60-80%.

Task 4: USB Debugging should be enabled.

 

Important:  Most of the custom ROM will not have Google Apps in them. So, you have to Download gapps for Lineage OS 7.1.1 manually.

 

You Decided to install Lineage OS On your HTC 10. But you don’t know the Procedure of flashing Custom Roms, You should Follow our guide How to Root Lineage OS ROM Easily on your Smartphone.


TWRP recovery lets you do a number of cool stuff. But the whole purpose of having a custom recovery is to be capable of flashing unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

As we are proceeding ahead to Flash the Lineage os on HTC 10. But before that we should take nandroid backup before installing lineage os.

How to Update Official Lineage OS HTC 10 (Pme) Android 7.1.1 using TWRP Recovery

 

  • Download and transfer the Lineage os ROM and Gapps for lineage os you wish to flash to your Smartphone storage.
  • Boot your Smartphone into TWRP recovery.
  • Select “Wipe” from a TWRP main menu and do a “Swipe to Factory Reset” on the bottom of the screen.

└ Note: This will factory reset your Smartphone. If your custom ROM doesn’t need a factory reset then simply skip this step.

 

Update Official Lineage OS HTC 10 (Pme)-1

 

  • Go back to TWRP main menu, tap on “Install” and select the Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of the screen to begin the custom ROM installation procedure. This may take some of the time.

 

Update Official Lineage OS HTC 10 (Pme)-2

 

  • Once ROM is flashed, you get “Wipe cache/Dalvik” option now select it and click “Swipe to wipe” on the bottom of the screen.
  • Once cache & Dalvik wipe finishes, Tap the “Back” button on-screen and then choose “Reboot System” button.

Now you are Done with the Installing Of Lineage Os ROM on your Smartphone. Now while using new Custom Rom if you Found Any Bugs Or Errors, Do follow our Guide How To Fix Bugs in Lineage OS ROM.

 

REQUIRED LINKS AND FILES FOR HTC 10 (Pme) LINEAGE OS 14.1 NOUGAT CUSTOM ROM:

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here